赛车pk10技巧经验

Steps for using pig head hair dryer

hit count: Updated: 2019-04-02 09:35:04 share it:
    The pig head hair-cutting machine is made of stainless steel, saving labor and faster. The main function of the automatic pig head hair-cutting machine is to depilate the pig head. The operation is simple, as long as the ironed pig head is placed in a fixed position. Just store it. The following describes the steps for using the pig hair dryer:
    1. The pig head shaving machine is a device for depilating and shaving pig heads after slaughter. The equipment is divided into 200, 300, 400 models. According to customer needs, our company also produces a small model 200, which is suitable for daily slaughtering. Small slaughtering plant with less than 50 pigs and weighing less than 500 kg. After the pigs are slaughtered, they must be immersed in a professional pig head scalding pool.
    2. Pig head scalding pool is divided into iron and stainless steel, stainless steel is more durable than iron. The hot pool is equipped with a temperature sensor, and the power distribution box is equipped with a temperature controller. The temperature is maintained within the temperature range you set. Changing the traditional way that the traditional hot pig can only rely on the hand to test the temperature to prevent the pig head from getting old or insufficiently soaked. For domestic white pigs, our guide temperature is 60-65 ℃ for 3 minutes. The water temperature and scalding time will vary depending on the type of pig's head and the actual local climate and temperature.
    3. After the pig head is soaked and scalded, use a hydraulic fishing rake to lift the pig head out of the ironing pool. If the shaving roller has not yet started running, it is recommended that the pig head be turned back to the machine cavity to prevent the pig legs from entering the shaving block. Gap, stuck pork leg, resulting in broken pork leg. The hydraulic fishing harrow uses an oil well capable of lifting 4 tons, with long service life and good effect.
    4. When the pig head is on the fishing rake, start the operation button of the hair roller. The -rod-fishing rake continues to lift, the pig head rolls into the machine cavity for fast hair removal, the hair removal time is generally 15 seconds, and the net hair rate is very high. The effect is really good. There is a large red emergency stop button on the power distribution box. In case of emergency, such as stuck pig legs, after the problem is solved, the button will automatically rise and restart the work.
    5. After the hair removal of the pig head is completed, the work of the pig head hair removal machine is completed. The pig head must enter the washing pond for cleaning, and then enter the next stage of digging, inspection, splitting and other processes, before the pig head slaughtering process can be completed.
    Editor: Fairy