What should be paid attention to when cleaning pig head splitting machine? Here is a brief introduction for everyone:
1. In operation, first you need to cut off the power first, and then remove the remaining composite film and seal it.
2. Remove the hopper, turntable and bag maker, move to the cleaning room, wipe off the surface dust with a dry rag or brush, and use a copper brush to clean the film scale on the longitudinal and horizontal seals of the pig head.
3. Wipe the exterior of the equipment with a rag, so that the entire equipment does not leave material residues and keep dry. Pay attention to the use of separate cleaning tools and cleaning agents for cleaning the inside and outside surfaces when cleaning.
4, visual inspection, there should be no visible residual drugs or traces, then retrieve the removed parts and install them in accordance with the program.
5. Hang the cleaning status sign and fill in the record.
The pig head split machine is cleaned with drinking water and rinsed twice with purified water, then wiped clean with a clean dry towel, the parts are dried, and wiped with a cloth moistened with 75% ethanol before use.